IS 1893 (Part 4) : 2015 - Criteria for Earthquake Resistant Design of Structures - Industrial Structures Including Stack

IS 1893 (Part 4) : 2015 - Criteria for Earthquake Resistant Design of Structures - Industrial Structures Including Stack - Like Structures

This standard covers the earthquake resistant design of industrial structures, including stack-like structures, shall be designed and constructed to resist the earthquake effects and also provides the estimate of earthquake forces for design of such structures.

The standard includes detailed provisions on general principles including ground motion (including necessary assumptions and increase in permissible stresses); design spectrum to be used and the seismic coefficients; categorization of industrial structures; detailed design criteria which includes design loads, load combinations, special design factors, etc.

It also provides specific requirements for stack like structures which includes the design criteria; time period of vibration; design seismic force; dynamic analysis and special considerations for reinforced concrete stakes.

To Download

II Click Here II

Comments

IS 13920 : 2016 -Ductile Design and detailing of reinforced concrete structures subjected to seismic forces-Code of practice

IS 13920 : 2016 - Ductile Design and detailing of reinforced concrete structures subjected to seismic forces-Code of practice since it was first published in 1993. Most of the older provisions have been redrafted and modified for greater clarity and new provisions have been added. Much of the this revision is based on the IITK-GSDMA document of proposed draft provisions. To Download II Click Here II

IS 875 (Part 3) : 2015 -Design Loads (Other than Earthquake) for Buildings and Structures - Code of Practice - Wind Loads ( Third Revision )

To Download II Click Here II

IS 1893 (Part 1) : 2016 - Criteria For Earthquake Resistant Design Of Structures - General Provisions And Buildings

The provisions of this standard are applicable for design of structures like parking structures, security cabins and ancillary structures taking into account appropriate earthquake effects as per this standard. This standard is also applicable for design of temporary elements, such as scaffolding and temporary excavations. This standard does not deal with construction features relating to earthquake resistant buildings and other structures. For guidance on earthquake -resistant construction of buildings, reference may be made to the latest revisions of the following Indian Standards: IS 4326, IS 13827, IS 13828, IS 13920, IS 13935 and IS 15988. The provisions of this standard are applicable even to critical and special structures, like nuclear power plants, petroleum refinery plants and large dams. For such structures, additional requirements may be imposed based on special studies, such as site-specific hazard assessment. In such cases, the earthquake effects specified by

DCP

Search This Blog